Pouch Cell Final Vacuum Sealer with Auto Piercing Function
Brief Introduction
STC-BEF-200 vacuum sealer is used for pouch cell final vacuum sealing after
electrolyte injection and cell formation, it is with auto piercing
function to de-gassing the cell and do a secondary sealing under
vacuum condition. It is touch screen operation high automation.
Key Features
● With piercing needle, piercing function can be completed automatically.
● Sealing blade is made from copper with good heat conduction.
● Upper and lower sealing blade sealing pressure can be adjusted.
● Upper and lower sealing blade temperature be controlled separated
and settable, digital display by thermostat.
● The lid can go down only by pressing the 2 start buttons at the
same time to avoid hands get injured.
● Touch screen operation, high automation.
● Sealing time can be set.
● Through perspective window to observe it during working.
● The lid will open automatically when it finished sealing.
Technical Parameters
| Model | STC-BEF-200 |
| Voltage | AC220V±10%, 50Hz |
| Power | Adopting 300W heat tube, the power consumption when heating is
about 600W |
| Sealing blade length | 200mm, customized size is available |
| Sealing blade width | 5±0.4mm, customized size is available |
| Sealing thickness | 60~300μm |
| Sealing thickness accuracy | Any two points of the sealing thickness difference <15μm |
| Sealing blade temperature | RT~250℃ adjustable |
| Temperature control accuracy | ±1.5°C |
| Heat sealing pressure | 0～7Kg/cm2 adjustable |
| Heat sealing time | 0~99s adjustable |
| Vacuum degree | ≤ -96Kpa |
| Gas consumption | About 0.2L compressed gas per sealing |
| Compressed air working speed | ≥180 times/h |
| Compressed air source | 0.5~0.7MPa |
| Dimension | L500 * W400 * H600mm |
| Weight | 48kg |
Warranty
1 year warranty with lifetime support. Man-made damage is not
covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab
research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different
requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site
installation service.
