5V 12A 8 Channels Battery Testing Equipment
Brief Introduction
STC-4008Tn-5V12A is a three range output current tester, 5mA-1A, 1A-6A, 6A-12A. The
accuracy for current and voltage on these channels is ±0.05% FS. It
is widely used for manufacturers, universities and labs. The
flexibility of the 5V12A analyzer allows it to be used for a wide
range of applications, such as materials research, quality control
in manufacturing, research & development, battery and cell testing,
super-capacitor testing, etc.
Features
● Multi ranges.
● Wide application.
● High accuracy, ±0.05% FS.
● Fast response time.
● Each channel is independent.
● Side air intake on the left / right side & eight test channels,
the inventive heat-radiating system is practical and feasible and
can increase heat-radiating efficiency and space utilizaion rate.
Technical Parameters
Input Power | AC220V±10% / 50Hz |
Resolution | AD:16bit; DA:16bit |
Input Resistance | ≥1GΩ |
Input Power | 826W |
Channel Features | Constant Current Source and Constant Voltage Source with
Independent pairs of Closed-loop Structure |
Channel Control Mode | Independent Control |
| Voltage | Per Channel Control Voltage Range | 25mV~5V |
Minimum discharge voltage | Upper and lower clamp discharge to 1V, 2m cables to 1.5V |
Accuracy | ± 0.05% of FS |
Stability | ± 0.05% of FS |
Current | Per Channel Current Range | Range 1: 5mA~1A , Range 2: 1A~6A, Range 3: 6A~12A |
Constant current cut-off current | Range 1: 2mA, Range 2: 12mA , Range 3: 24mA |
Accuracy | ± 0.05% of FS |
Stability | ± 0.05% of FS |
Power | Per Channel Output Power | 60W |
Stability | ± 0.1% of FS |
Time | Current Response Time | <1ms (0-Full Range) |
Step Time Range | ≤(365*24 )hour/step, Time Form Support 00:00:00.000(h,min,s.ms) |
Data Recording | Record Condition | Time△t:100ms |
Voltage△U: 10mV |
Current△I:Range 1: 2mA, Range 2: 12mA , Range 3: 24mA |
Record Frequency | 10Hz |
Charge | Charge Mode | Constant Current Charge,Constant Voltage Charge, Constant Current
and Constant Voltage Charge, Constant Power Charge |
End Conditon | Voltage, Current, Relative Time, Capacity |
Discharge | Discharge Mode | Constant Current Discharge,Constant Power Discharge, Constant
Resistance Discharge |
End Condition | Voltage, Current, Relative Time, Capacity |
Pulse Test | Charge | Constant Current Charge, Constant Power Charge |
Discharge | Constant Current Discharge, Constant Power Discharge |
Minimum Pulse Width | 500ms |
Pulse Number | 32 diffirent pulse for a single step |
Automated Switch | Automated switch from charge to discharge for each pulse |
Cycle | Loop Measure Range | 1~65535 times |
Max Steps Per Loop | 254 |
Nested Loop | Nested loop Function, Max support 3 Layers |
Protection | Power-down Data Protection |
Off-line Testing Function |
Setting Protection Condition,Setting Parameter: Low Voltage limit,
Upper Voltage limit, Low Current limit, Upper Current limit, Delay
Time, Anti-reverse Protection Model |
Voltage and Current Testing Sample | 4-wire connecting |
Noise | <55dB |
Database | MySQL Database |
A Means of Communication of Upper Machine | TCP/IP Protocol |
Data Output | EXCEL 2003, 2010, TXT |
Server disk configuration | 500GB |
Communication Interface | Internet Access |
Server Operating System | Windows 7 |
Per Unit Main Channels No. | 8 |
Clamp | Alligator clamp, Polymer clamp, Ring clamp optional |
Dimension | L483 * W404 * H130mm |
Warranty
1 year warranty with lifetime support. Man-made damage is not
covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab
research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different
requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site
installation service.
