80 Channels Battery Testing Machine
Product Details
STC-4008Tn-5V6A is a three range output current tester, 0.5mA~1A, 0.1A~3A, 3A~6A.
The accuracy for current and voltage on these channels is ±0.05%
FS. It has 80 channels, each channels is working independently. The
flexibility of this tester allows it to be used for a wide range of
applications such as materials research, quality control in
manufacturing, research & development, battery and cell testing,
Supercapacitor testing, etc.
Key Features
• Multi ranges.
• Width application.
• High accuracy, ±0.05%FS.
• Fast response time.
• Each channels is independent.
• Side air intake on the left/ right side & eight test channels,
the inventive heat-radiating system is practical and feasible and
can increasing heat-radiating efficiency and space ulilization
rate.
Technical Parameters
| Input power | AC220V±10%, 50Hz |
| Resolution | AD: 16bit; DA: 16bit |
| Input resistance | ≥1GΩ |
| Input power | 425W |
| Channels features | Constant current source and constant voltage source with
independent pairs if closed-loop structure |
| Channel control mode | Independent control |
| Voltage | Per channel control voltage range | 25mV~5V |
| Minium discharge voltage | Upper and lower clamp discharge to 1V, 2m cables to 1.5V |
| Accuracy | ±0.0.5% of FS |
| Stability | ±0.0.5% of FS |
| Current | Per-channel current range | Range 1: 0.5mA~0.1A, Range 2: 0.1A~3A, Range 3: 3A~6A |
| Constant current cut-off current | Range 1: 0.2mA, Range 2: 6mA, Range 3: 12mA |
| Accuracy | ±0.05% of FS |
| Stability | ±0.05% of FS |
| Power | Per channel output power | 30w |
| Stability | ±0.05% of FS |
| Time | Current response time | <1ms |
| Step time range | ≤(365*24)hours/step, Time form support 00: 00: 00.000(h, min , s,
ms) |
| Date recording | Record condition | Time△t: 100ms |
| Voltage△U: 10mV |
Current△I: Range 1: 2mA, Range 2: 6mA, Range 3: 12mA |
| Record frequency | 10Hz |
| Charge | Charge mode | Constant current charge, constant voltage charge, constant current
and constant voltage charge, constant power charge |
| End condition | Voltage current, relative time capacity, -△V |
| Discharge | Discharge mode | Constanr current dischage, constant voltage discharge constant
current and constant voltage discharge, constant power discharge,
constant resistance discharge |
| End condition | Voltage current, relative time, capacity, -△V |
| Pulse test | Charge | Constant current charge, constant power charge |
| Discharge | Constant current discharge, constant power discharge |
| Miniumum pulse width | 500ms |
| Pulse number | 32 different pulse for a single step |
| Charge and discharge switch | continuous switched for a single pulse step |
| End condition | Voltage, relative time |
| DCIR test supported |
| Cycle | Loop measure range | 1~65535 times |
| Max steps per loop | 254 |
| Nested loop | Nested loop function, max support 3 layers |
| Protection | Power down data protection |
| Off line testing function |
| Setting protection condition, setting parameter: low voltage limit,
upper voltgae limit, low current limit, upper current limit,
anti-reverse protection model |
| Voltage and current testing sample | 4-wire connecting |
| Noise | <55db |
| Database | MySQL Datebase |
| A means of communication of upper machine | TCP/ IP Protocol |
| Data output | EXCEL 2003, 2010, TXT |
| Server disc configuration | 500GB |
| Communication interface | Internet access |
| Server operating system | Windows 7 |
| Leak current | <5 μA |
| Per unit main channel qty | 80 |
| Clamp | Alligator clamp, polymer clame, ring clamp optional |
| Dimension | L483 * W404 * H1300mm |
Warranty
1 year warranty with lifetime support. Man-made damage is not
covered.
FAQ
1. Are you a manufacturer?
A: Yes, our factory is located in Shenzhen, China.
We have more than 10 year experience for manufacturing battery lab
research equipment. We own a professional R&D department.
2. Do you accept customized product?
A: Yes. Most of our products can be customized to meet different
requirements.
3. Will you provide test video before dispatch?
A: Yes, we take test video for every equipment before dispatch,
which will display how to use it.
4. Can you offer overseas installation service?
A: Yes, we can dispatch professional engineer for on-site
installation service.
